Reset Canon Pixma Printer
Is your Canon Pixma printer creating an issue? Are you facing a problem with Canon Pixma and it is showing an error message continuously? Well, if yes then you can solve this problem through the Reset Canon Pixma printer. Sometimes a quick reset of the device helps fix the issue.
Wondering how to Reset Canon Pixma Printer to Factory Settings? Don’t worry. This article will help you by describing the different methods to reset your Canon Pixma printer. Let’s go ahead.
Instructions to Reset Ink of Canon Pixma Printer
Canon printers have an inbuilt chip that gives the notification to the users about refilling the ink cartridge when the old one is out of ink or becomes low. Replacing the ink cartridge may hamper the printing process but resetting the ink cartridge is the better option.
Here’s are the steps to reset the Canon Pixma printer ink and bring your printer back to normal printing operation:
- Firstly, check for a resetter before going further to reset the ink cartridge.
- Open the ink cartridge door and make sure to remove it from cartridge slots.
- Place the ink cartridge into the core channel of your resetter.
- Thereafter, ensure that the contacts on the ink cartridge touch resetter’s contacts available on it.
- Press and hold the ink cartridge of your printer to the downside until the power LED light becomes stable.
- After that, take the cartridge and then place it in the appropriate slots. Next, close the cartridge’s access door.
- Finally, the ink level of your printer is reset successfully.
Guidelines to Reset Wireless Connection
Carry out the below steps to reset the Canon printer WiFi connection:
The initial step is to turn off the printer. To do this, tap on the power button placed on the control panel of your printer.
Ensure that the power cables are unplugged from the power socket and Canon printer.
Press the Stop button and after that power button.
Now, tap five times on the stop button one after the other while pressing the power button.
The power LED light continues to flash. Wait for 2-3 minutes until the LED light becomes stable.
Tap the Stop button on your device five times Stop button when the Led light becomes stable and then press the power button.
Now, your printers start the printing operation. If your printer will carry out the printing operation then it means reset is completed successfully.
Quick Steps to Reset Canon Pixma Printer
Look at the below steps to reset Canon Pixma printer so that it will work fine again:
- Make sure that your printer is switched on.
- In case, if your printer is in Sleep mode then click on the power button to activate it again.
- After that, disconnect the power cord from the electrical socket and Canon printer.
- Thereafter, remove the USB cable or the Ethernet cable attached to your printer and wait for some time.
- In the next step, connect the power cable to the Canon printer as well as the power socket. Switch on the power socket.
- Switch on your printer and place a bunch of papers into the input paper tray.
- Try to print a paper from your printer to check if the issue is resolved or not that restricts your printer from printing.
How to Reset Canon Pixma Printer to Factory Settings?
Follow the below instructions to reset the printer to the factory default settings. Remember that the reset to factory default settings will delete the customized settings made by you.
- Make sure that your printer is switched on.
- After that, click on the Menu button and click on the Setup button.
- Next, highlight the choices that you want with the help of navigation arrows.
- Click on the Device setting option and click on the Ok button to proceed further.
- In the next step, choose the Reset settings. Click on Ok to start the reset procedure.
- In Some Canon Pixma models, you can choose the Device Settings directly without navigating to the Setup option.
We hope by reading the above-mentioned steps, you will get to know how to Reset Canon Pixma Printer to Factory Settings without any hassle.
Also Checkout – Canon Pixma Wireless Setup
