Need For Brother Printer WiFi Setup

Do you want to connect your Brother printer wirelessly? Well, then it is a good choice as this allows you to print from any same network device. But, to achieve this, there is a need to do the Brother Printer WiFi Setup. Well, it is not a difficult task. One can do it easily, and use their printer wirelessly. The only need is to follow the right guide.

However, there is no need to worry. Your search for an accurate guide ends here. This blog has clearly defined all the steps to set up Brother printer WiFi. Every detail about connecting the printer to the WiFi and installation of the printer driver is described in this blog.

So, you don’t need to go anywhere. Let’s find out the steps and make your Brother printer work.

Prerequisites Before Brother Printer WiFi Setup

  1. WiFi network’s name or SSID to which you want to connect.
  2. Check the base of the router to know the SSID.
  3. You must know the password or security key of the network.

Now, as you know the details of your network, then you are ready to do the setup.

Learn Steps To Setup Brother Printer WiFi

As you have the above-mentioned details, now you can go with the Brother printer setup using a wireless network. Surely, after this, you can print from any device connected to the same network. So, follow the steps mentioned below to connect your printer to the WiFi.

Steps To Setup Brother Printer WiFi

Steps-To-Setup-Brother-Printer-WiFi

  1. Firstly, connect your Brother printer to the nearby power source.
  2. Hold the Power button to turn on your Brother printer.
  3. How, press the Menu button on the Control Panel of the Brother printer.
  4. Next, press the Up Arrow key or Down Arrow key for the selection of the network.
  5. Now, press the OK button on your printer.You will see the various options for the network like WLAN, LAN, Wired, etc.
  6. Again, press the Up or Down arrow key on the printer to select the WLAN network option.
  7. Press OK, and confirm your choice.Use the arrow keys on the printer to navigate to the Setup Wizard.
  8. Next, the “WLAN Enable?” will appear on the printer’s screen.
  9. Select the option “Yes” to enable the WiFi, or wireless network on your printer.
  10. Automatically, the “Wireless Setup Wizard” will start on your printer.
  11. Your Brother printer will now search for the available nearby wireless networks.
  12. Next, the printer’s screen will show you the list of names of the available networks.
  13. As you have noted down the SSID of your network earlier, look for it in the list.
  14. Now, use the arrow keys again, and select the SSID of your network from the list.
  15. Press OK for confirmation of choice. Enter the password of the network if asked.
  16. Now, the Brother printer will try to connect to the mentioned wireless network.
  17. On a successful connection, the printer’s screen will show you the message “Connected Printing”.
  18. The printout will come out with the message, “Connection: OK”.

Install Printer Driver To Complete Brother Printer WiFi Setup

Finally, it is the last phase of the printer’s setup. Without the printer driver, your printer cannot print any document. Therefore, here are the steps to install the printer driver for both Windows and Mac users.

For The Windows Users

  • Go to the Brother printer’s website on your updated web browser.
  • Download the recommended printer’s driver for your printer’s model.
  • Then, go to the Downloads folder in your system.
  • Look for the downloaded file, and open it.
  • Apply all the on-screen instructions shown on the screen.
  • Install the printer driver software, and wait for the installation to get complete.
  • Take the test printout from your system.

On taking out the right print, your Brother printer WiFi setup is complete.

For The Mac Users

For-The-Mac-Users

  • Either open the Safari Browser or Google Chrome on your Mac system.
  • Go to the official website of Brother’s printer.
  • Download the required printer’s driver and open it.
  • Next, go to your Apple Menu, and then choose System Preferences from it.
  • Next, select Printers and Scanners from the list.
  • Click on the (+) sign to add your printer.
  • The new screen will open to add your printer.
  • Select the name of your Brother printer.
  • Next, go to the “Use” menu.
  • Then, select the option of “Air Print” in the list.
  • At last, click on the Add button shown on the screen.

Finally, take out the test printout, and confirm the successful installation of the printer.

Print With Brother Printer!

Now, as you have learned the way to setup Brother printer WiFi, therefore, you can use your printer. In this blog, everything is explained clearly for both- Windows and Mac users. Here, you will get the knowledge to connect the printer to the WiFi along with the installation of software.

However, in case, you still face any issue with the Brother printer, contact us for instant help. Our experts are available 24 X 7 to help you with your queries regarding the Brother printer. So, get your queries resolved, and print freely with your Brother printer.